Upgrade Instructions

These Firmware Upgrade instructions are for the following players :

WARNING : FAILURE TO FOLLOW THESE INSTRUCTIONS CORRECTLY WILL RESULT IN A DAMAGED AND UNUSABLE  DVD PLAYER !!! WE ACCEPT NO RESPONSIBILTY FOR ANY DAMAGE CAUSED TO YOUR PLAYER BY USING THIS UPGRADE CD.

1) Switch on the player.

2) Open the disc tray

3) Place the disc in the tray and close it.

4) The player will now load the disc and the TV screen will say "Load from CD" 

5) Using the remote control you must select YES then press ENTER.

6) The upgrade will now start to load , the display on the player will show "Reading". This part of the process should take around 1 minute.

DO NOT TOUCH THE PLAYER AT THIS TIME .... 

 NEVER UNPLUG THE PLAYER OR TOUCH ANY KEYS WHILST IT IS STILL SHOWING "Reading"

6) After around 1 minute the tray will automatically open and the TV screen will say "Restart Player". At this time it is safe to remove the disc and switch the player off using the remote control.

7) The player will switch off leaving the tray still out , when you switch the player back on the tray will close and the process is complete. Your player is now multi-region.